Realised by comparing text & photos from the Sigma & Rover build manuals that we’ve fitted the handbrake cable with the adjuster on the wrong side of the chassis ( should be on the left hand side) so had to correct this. Not as easy second time round now the diff’s in.
Installed de Dion A frame, driveshafts & de Dion ears but held off fitting disk/hubs & brake callipers as unclear if speed sensor & bracket(s) are needed & don’t want to have to pull the disk/hubs off again. Rover manual doesn’t mention them but Sigma manual does; need to check with Caterham.
No comments:
Post a Comment