Confirmed speed sensor brackets not required for Rover build so set about fitting disk/hubs Filled brakes with fluid & bled using Ezibleed to check no leaks. Brakes binding on disks & not sure if hubs are fully seated or missing spacers to align brake disks in centre of callipers. Can’t undo or do up hub nut as Jamie can’t hold on the brakes so Graham comes round. Brakes leaking at 3 way union & rear calipers but need to remove callipers to sort out brake/hub/disk alignment issues. Nuts removed & hubs/disk are seating OK. Conclude that either have wrong parts or missing a spacer.
No comments:
Post a Comment